You have no items in your shopping cart.
no category
Quick Overview
Ceiling directional PIR switch.Free motion sensor design call: 08001185755
Product Description
Designed to give a directional view of the activity to be monitored. Detection angle 120°. Can be rotated and lowered to a 45º angle.
The socket can be mounted on a BESA box
Call us for a free no obligation motion sensor design on: 08001185755
The socket can be mounted on a BESA box
Call us for a free no obligation motion sensor design on: 08001185755
Additional Information
| How It Works | Start-up mode When the mains supply is initially connected to the PIR occupancy switch it goes through its Start-up Mode. This means it switches on for about 1 minute, then switches off and enters its Operating Mode. If a manual wall switch is feeding the PIR occupancy switch (see wiring diagrams on appropriate product pages) then it will go through the Start-up Mode each time the wall switch is switched on. By wiring the manual wall switch in the alternative position, the supply to the PIR occupancy switch is uninterrupted and it remains in Operating Mode. It does not go through its Start-up Mode each time the wall switch is switched on. |
|---|---|
| Specification | Time lag range: 10 seconds to 40 minutes in 9 steps Photocell range: 100 to 1000 lux, and inactive Loading: up to 6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W) of fans Dimensions (mm): See image 4 |
| Manufacturer | The Energy Saving Company |