TESC. sustainability, Carbon reduction & Cost cutting;

Power flush your system

Why should you have your heating system power flushed?

Cleaning a dirty central heating system is essential to maximise the efficiency of the system and will normally reduce your annual heating bills. Our professional, certified service gives your heating system a thorough treatment and can increase efficiency by 25% guaranteed!

Air will inevitably build up in any central heating system. When this occurs the system can corrode internally, producing black iron oxide sludge deposits in radiators and other iron components. This sludge sticks to all surfaces, causing noisy operation, premature failure of pumps and valves, and cold, inefficient radiators. System efficiency is greatly reduced resulting in wasted fuel as the heating is turned up to compensate.

Even if you have recently had a new heating system installed a Power-Flush is still necessary. Oil, grease and iron filings can be present from the new components installed and these also need to be removed.

What happens during our Power Flush?

• A sludge remover is added to dislodge any sludge and debris in the system
• A cleaning agent is used to remove the dislodged dirt and clean out the system
• A reciprocating Jet-Flush machine is used to thoroughly replace the dirty water with clean water
• An inhibitor is added to your system to help prevent scale and corrosion inside your system

How long does it take?

A thorough power-flush will take from 3 hours upwards depending on the individual system. Normal central heating pumps only pump in one direction. During a power-flush, a specialist omni-directional pump is used to dislodge the debris, and chemicals are used to gently break-down the debris so that it can be flushed out.

for more information or advice or if you would like to register online click below.