You have no items in your shopping cart.
no category
Quick Overview
Wall mounted PIR switch, no neutral required.Free motion sensor design call: 0800 118 5755
Product Description
Wall mounted PIR switch, no neutral required.
The WAPIR model replaces an existing wall switch – no neutral wire is needed. It fits into a plaster depth (16mm) wall box. The WAPIR model also has a manual override off switch on the front of the plate.
The WAPIR requires a permanent live supply, and should only be used in applications where the lights would not be on for more than 12 hours per day. This is to allow its rechargeable battery enough time to recharge itself from the mains supply.
The WAPIR is suitable for small offices, meeting rooms, tutoring rooms, etc.
The override off button enables the lights to be held off during video presentations, etc. For wall mounting only.
Call us for a free no obligation motion sensor design on: 0800 118 5755
The WAPIR model replaces an existing wall switch – no neutral wire is needed. It fits into a plaster depth (16mm) wall box. The WAPIR model also has a manual override off switch on the front of the plate.
The WAPIR requires a permanent live supply, and should only be used in applications where the lights would not be on for more than 12 hours per day. This is to allow its rechargeable battery enough time to recharge itself from the mains supply.
The WAPIR is suitable for small offices, meeting rooms, tutoring rooms, etc.
The override off button enables the lights to be held off during video presentations, etc. For wall mounting only.
Call us for a free no obligation motion sensor design on: 0800 118 5755
Additional Information
| Specification | Detection zone: 120º Time lag range: 10 seconds to 40 minutes in 9 steps Photocell range: 100 to 1000 lux, and inactive Loading: up to 6 amps (1500W) of resistive, fluorescent or inductive lighting loads, or up to 1 amp (250W)of fans Dimensions (mm): 86 x 86 x 22 Wall box depth (mm): 16 |
|---|---|
| Manufacturer | The Energy Saving Company |